不能移远M95连接到互联网

Question

我目前尝试使用移远M95互联网使用我的树莓派3在Windows 10物联网连接我的GSM 2点击屏蔽。为了做到这一点，我试图2种方法：先我试图使用此功能http协议：

-AT+QIFGCNT=0                            ==>OK
-AT+QICSGP=1,"CMNET"                     ==>OK
-AT+QIREGAPP                             ==>OK
-AT+QIACT                                ==>ERROR
-AT+QHTTPURL=urlLenght,MaxInputTime
-Put the website                         ==>CME ERROR: 3810

我用GPRS尝试过：

-AT+CGATT?                              ==>OK
-AT + CGDCONT = 1,"IP","gprs.oi.com.br" ==>OK
-AT+CGACT=1,1                           ==>CME error 100
-AT+CGATT=1                             ==>OK
-AT+QIDNSIP=1                           ==>OK
-AT+QIOPEN="mode","IP_adress","port"\n  ==>CME error 100

我不明白为什么它不工作...有人可以帮我吗？谢谢

Answer 1

为了您的“CGDCONT”命令，你或许应该指定的用户名和密码。例如：

AT + CGDCONT = 1,"IP","gprs.oi.com.br","",""因为没有用户名和密码。让我知道如何继续下去。

另外，在QIREGAPP情况下，还需要指定APN，用户名和密码。例如：

AT+QIREGAPP="gprs.oi.com.br","",""

请更新如上的命令（包括APN，用户名和密码都CGDCONT和QIREGAPP），我会更新相应的答案。

另外，我基本上是拉一些来自移远“Recommended TCP/IP Process App Note”这一内容

Answer 2

我有同样的问题。

对于我来说，这个问题是在APN名称。事实证明，虽然我是连接到“橙色”的网络，我的SIM卡是从“泰利特物联网”，我需要使用AT+QICSGP=1,"internetm2m.air.com","","",0这种改变我能够使用连接后设置APN为“internetm2m.air.com”下列：

/* Use AT+QICSGP=1,"INTERNETM2M.AIR.COM","","",0 to set APN as "INTERNETM2M.AIR.COM",user name as "",password as "" */
[2017-02-07 14:03:32:499_S:] AT+QICSGP=1,"INTERNETM2M.AIR.COM","","",0
[2017-02-07 14:03:32:511_R:] AT+QICSGP=1,"INTERNETM2M.AIR.COM","","",0

[2017-02-07 14:03:32:517_R:] OK

/* (4) Start TCPIP task */
[2017-02-07 14:03:32:544_S:] AT+QIREGAPP
[2017-02-07 14:03:32:559_R:] AT+QIREGAPP

[2017-02-07 14:03:32:560_R:] OK

/* Check the current connecting mode(1: GPRS connecting mode£¬0: CSD connecting mode) */
[2017-02-07 14:03:32:584_S:] AT+QICSGP?
[2017-02-07 14:03:32:592_R:] AT+QICSGP?

[2017-02-07 14:03:32:594_R:] +QICSGP: 1

[2017-02-07 14:03:32:594_R:] OK

/* The current connecting mode is GPRS connecting mode */

/* Active the GPRS context */
[2017-02-07 14:03:32:626_S:] AT+QIACT
[2017-02-07 14:03:32:640_R:] AT+QIACT

[2017-02-07 14:03:33:343_R:] OK

Answer 3

同时努力我的GPRS模块连接到使用全息图作为我的APN互联网我有同样的问题。继this和this我用下面的命令中所提出的秩序和工作得很好对我来说：

AT+CGDCONT=1,"IP","hologram"
AT+CGACT=1,1
AT+CGATT=1
AT+QIDNSIP=1
AT+QICSGP=1,"hologram","","",0
AT+QIREGAPP?
AT+QIOPEN="TCP","tarcis.io",80