ioremap返回NULL

Question

我正在尝试为Raspberry PI创建定制的UART驱动程序。我尝试对MMIO进行映射。但是ioremap总是返回NULL。

#define UART_REG_BASE_ADDR  0x7E20100

pUart = ioremap(UART_REG_BASE_ADDR, 1024);
if (pUart==NULL)
{
    printk("Couldn't remap UART MMIO\n");
    return -EIO;
}

[dmesg转储以下内容：

[ 2906.579848] CPU: 0 PID: 4983 Comm: insmod Tainted: G      D W  O   3.18.5+ #1
[ 2906.590783] [<c0014b64>] (unwind_backtrace) from [<c00120ec>] (show_stack+0x20/0x24)
[ 2906.614046] [<c00120ec>] (show_stack) from [<c0549008>] (dump_stack+0x20/0x28)
[ 2906.624803] [<c0549008>] (dump_stack) from [<c0022620>] (warn_slowpath_common+0x7c/0x9c)
[ 2906.647925] [<c0022620>] (warn_slowpath_common) from [<c002266c>] (warn_slowpath_null+0x2c/0x34)
[ 2906.668656] [<c002266c>] (warn_slowpath_null) from [<c001a888>] (__arm_ioremap_pfn_caller+0x240/0x25c)
[ 2906.691936] [<c001a888>] (__arm_ioremap_pfn_caller) from [<c001a934>] (__arm_ioremap_caller+0x68/0x70)
[ 2906.713171] [<c001a934>] (__arm_ioremap_caller) from [<c001a3d0>] (__arm_ioremap+0x24/0x2c)
[ 2906.735043] [<c001a3d0>] (__arm_ioremap) from [<bf19c028>] (hello_init+0x28/0x88 [domotx])
[ 2906.755780] [<bf19c028>] (hello_init [domotx]) from [<c000873c>] (do_one_initcall+0x94/0x1e4)
[ 2906.778165] [<c000873c>] (do_one_initcall) from [<c0087e70>] (load_module+0x1848/0x1e38)
[ 2906.799410] [<c0087e70>] (load_module) from [<c008854c>] (SyS_init_module+0xec/0xf0)
[ 2906.822660] [<c008854c>] (SyS_init_module) from [<c000e980>] (ret_fast_syscall+0x0/0x48)
[ 2906.844558] ---[ end trace c7cdd8b3d5007a1b ]---
[ 2906.856382] Couldn't remap UART MMIO

我该怎么办？

Answer 1

我找到了上面报告的问题的解决方案。实际上，解决方案有两个方面：

• BCM2835数据表未在其数据表中发布物理地址：外围设备的物理地址范围从0x20000000到0x20FFFFFF。外设的总线地址设置为映射到从0x7E000000开始的外设总线地址范围。因此，此处在总线地址0x7Ennnnnn上公告的外围设备在物理地址0x20nnnnnn上可用。
• 数据表中有错字：PL011 USRT映射到基本加法器0x7E20100。必须为PL011 USRT映射到基本加法器0x7E20100 0。

Answer 2

无法发表评论，但是解决该问题的原始帖子中对代码的实际更改是什么？尚不清楚有关RPi寻址的信息如何转换为解决方案。