Icecast2 连接瑞文戴尔
问题描述 投票：0回答：1
我有带有 SSH 选项的服务器来运行自己的进程。在这台服务器上，我预先安装了命令
icecastices我想在 IceCast 中创建挂载点以通过 Rivendell 连接到它们。但是在阅读了许多带有示例的页面之后，我不明白为什么 Icecast 不能成为安装点。运行 ices 后，我有日志
No playlist type given$ icecast
Icecast 2.4.4
usage: icecast [-b] -c <file>
or : icecast {-v|--version}
options:
-c <file> Specify configuration file
-v or --version Display version info
-b Run icecast in the background
$ ices
IceS 2.0.3
(c) Copyright 2001-2020 The IceS Development Team <[email protected]>
Michael Smith <[email protected]>
Jack Moffitt <[email protected]>
Karl Heyes <[email protected]>
Philipp Schafft <[email protected]>
and others
Usage: "ices config.xml"
Using libshout 2.4.5
我运行两个命令我分开的过程：
$ icecast -c /icecast/icecast.xml
[2023-03-05 10:00:20] WARN fserve/fserve_recheck_mime_types Cannot open mime types file /etc/mime.types
$ ices /icecast/icecast-playlist.xml
[2023-03-05 10:02:01] INFO ices-core/main IceS 2.0.3 started...
[2023-03-05 10:02:01] EROR playlist-builtin/playlist_open_module No playlist type given, cannot initialise playlist module
[2023-03-05 10:02:01] EROR input/input_loop Couldn't initialise input module "playlist"
[2023-03-05 10:02:01] INFO ices-core/main Shutdown complete
但是我没有看到安装点。
我哪里弄错了？
icecast.xml<icecast>
<!-- location and admin are two arbitrary strings that are e.g. visible
on the server info page of the icecast web interface
(server_version.xsl). -->
<location>WORLD</location>
<admin>[email protected]</admin>
<limits>
<clients>100</clients>
<sources>2</sources>
<threadpool>5</threadpool>
<queue-size>524288</queue-size>
<client-timeout>30</client-timeout>
<header-timeout>15</header-timeout>
<source-timeout>10</source-timeout>
<!-- If enabled, this will provide a burst of data when a client
first connects, thereby significantly reducing the startup
time for listeners that do substantial buffering. However,
it also significantly increases latency between the source
client and listening client. For low-latency setups, you
might want to disable this. -->
<burst-on-connect>1</burst-on-connect>
<!-- same as burst-on-connect, but this allows for being more
specific on how much to burst. Most people won't need to
change from the default 64k. Applies to all mountpoints -->
<burst-size>65535</burst-size>
</limits>
<authentication>
<!-- Sources log in with username 'source' -->
<source-password>hackme</source-password>
<!-- Relays log in username 'relay' -->
<relay-password>hackme</relay-password>
<!-- Admin logs in with the username given below -->
<admin-user>admin</admin-user>
<admin-password>hackme</admin-password>
</authentication>
<!-- set the mountpoint for a shoutcast source to use, the default if not
specified is /stream but you can change it here if an alternative is
wanted or an extension is required
<shoutcast-mount>/live.nsv</shoutcast-mount>
-->
<!-- Uncomment this if you want directory listings -->
<!--
<directory>
<yp-url-timeout>15</yp-url-timeout>
<yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
</directory>
-->
<!-- This is the hostname other people will use to connect to your server.
It affects mainly the urls generated by Icecast for playlists and yp
listings. -->
<hostname>audio.example.com</hostname>
<!-- You may have multiple <listener> elements -->
<listen-socket>
<port>6000</port>
<bind-address>0.0.0.0</bind-address>
<!-- <shoutcast-mount>/stream</shoutcast-mount> -->
</listen-socket>
<mount>
<bitrate>128</bitrate>
<mount-name>/mp3</mount-name>
<fallback-override>0</fallback-override>
<fallback-when-full>0</fallback-when-full>
<public>1</public>
<max-listeners>150</max-listeners>
<fallback-mount></fallback-mount>
<genre>alternative</genre>
<type>audio/mpeg</type>
</mount>
<mount>
<bitrate>64</bitrate>
<mount-name>/mobile</mount-name>
<fallback-override>0</fallback-override>
<fallback-when-full>0</fallback-when-full>
<public>1</public>
<max-listeners>50</max-listeners>
<fallback-mount></fallback-mount>
</mount>
<!--
<listen-socket>
<port>8001</port>
</listen-socket>
-->
<!--<master-server>127.0.0.1</master-server>-->
<!--<master-server-port>8001</master-server-port>-->
<!--<master-update-interval>120</master-update-interval>-->
<!--<master-password>hackme</master-password>-->
<!-- setting this makes all relays on-demand unless overridden, this is
useful for master relays which do not have <relay> definitions here.
The default is 0 -->
<!--<relays-on-demand>1</relays-on-demand>-->
<!--
<relay>
<server>127.0.0.1</server>
<port>8001</port>
<mount>/example.ogg</mount>
<local-mount>/different.ogg</local-mount>
<on-demand>0</on-demand>
<relay-shoutcast-metadata>0</relay-shoutcast-metadata>
</relay>
-->
<!-- Only define a <mount> section if you want to use advanced options,
like alternative usernames or passwords
<mount>
<mount-name>/test</mount-name>
</mount>
<mount>
<mount-name>/autodj</mount-name>
<hidden>0</hidden>
</mount>
<mount>
<mount-name>/live</mount-name>
<fallback-mount>/autodj</fallback-mount>
<fallback-override>1</fallback-override>
<hidden>0</hidden>
</mount>
<mount>
<mount-name>/listen</mount-name>
<fallback-mount>/live</fallback-mount>
<fallback-override>1</fallback-override>
<hidden>0</hidden>
</mount>
-->
<mount type="normal">
<mount-name>/test.ogg</mount-name>
<username>othersource</username>
<password>hackmemore</password>
<max-listeners>1</max-listeners>
<dump-file>/stream/test01.ogg</dump-file>
<burst-size>65536</burst-size>
<fallback-mount>/test01.ogg</fallback-mount>
<fallback-override>1</fallback-override>
<fallback-when-full>1</fallback-when-full>
<public>1</public>
</mount>
<fileserve>1</fileserve>
<paths>
<!-- basedir is only used if chroot is enabled -->
<basedir>/icecast/</basedir>
<!-- Note that if <chroot> is turned on below, these paths must both
be relative to the new root, not the original root -->
<logdir>/icecast/</logdir>
<webroot>/icecast/web</webroot>
<adminroot>/icecast/admin</adminroot>
<!-- <pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->
<!-- Aliases: treat requests for 'source' path as being for 'dest' path
May be made specific to a port or bound address using the "port"
and "bind-address" attributes.
-->
<!--
<alias source="/foo" destination="/bar"/>
-->
<!-- Aliases: can also be used for simple redirections as well,
this example will redirect all requests for http://server:port/ to
the status page
-->
<alias source="/" destination="/status.xsl"/>
</paths>
<logging>
<accesslog>access.log</accesslog>
<errorlog>error.log</errorlog>
<!-- <playlistlog>playlist.log</playlistlog> -->
<loglevel>4</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
<logsize>10000</logsize> <!-- Max size of a logfile -->
<!-- If logarchive is enabled (1), then when logsize is reached
the logfile will be moved to [error|access|playlist].log.DATESTAMP,
otherwise it will be moved to [error|access|playlist].log.old.
Default is non-archive mode (i.e. overwrite)
-->
<!-- <logarchive>1</logarchive> -->
</logging>
<security>
<chroot>0</chroot>
<!--
<changeowner>
<user>nobody</user>
<group>nogroup</group>
</changeowner>
-->
</security>
</icecast>
ices-playlist<?xml version="1.0"?>
<ices>
<!-- run in background -->
<background>0</background>
<!-- where logs, etc go. -->
<logpath>/icecast/</logpath>
<logfile>ices.log</logfile>
<!-- 1=error,2=warn,3=info,4=debug -->
<loglevel>3</loglevel>
<!-- set this to 1 to log to the console instead of to the file above -->
<consolelog>1</consolelog>
<!-- optional filename to write process id to -->
<!-- <pidfile>/home/ices/ices.pid</pidfile> -->
<stream>
<!-- metadata used for stream listing (not currently used) -->
<metadata>
<name>Example stream name</name>
<genre>Example genre</genre>
<description>A short description of your stream</description>
</metadata>
<!-- input module
The module used here is the playlist module - it has
'submodules' for different types of playlist. There are
two currently implemented, 'basic', which is a simple
file-based playlist, and 'script' which invokes a command
to returns a filename to start playing. -->
<!-- Stream instance
You may have one or more instances here. This allows you to
send the same input data to one or more servers (or to different
mountpoints on the same server). Each of them can have different
parameters. This is primarily useful for a) relaying to multiple
independent servers, and b) encoding/reencoding to multiple
bitrates.
If one instance fails (for example, the associated server goes
down, etc), the others will continue to function correctly.
This example defines two instances as two mountpoints on the
same server. -->
<instance>
<!-- Server details:
You define hostname and port for the server here, along with
the source password and mountpoint. -->
<hostname>localhost</hostname>
<port>6000</port>
<password>hackme</password>
<mount>/mp3</mount>
<!-- Reconnect parameters:
When something goes wrong (e.g. the server crashes, or the
network drops) and ices disconnects from the server, these
control how often it tries to reconnect, and how many times
it tries to reconnect. Delay is in seconds.
If you set reconnectattempts to -1, it will continue
indefinately. Suggest setting reconnectdelay to a large value
if you do this.
-->
<reconnectdelay>2</reconnectdelay>
<reconnectattempts>5</reconnectattempts>
<!-- maxqueuelength:
This describes how long the internal data queues may be. This
basically lets you control how much data gets buffered before
ices decides it can't send to the server fast enough, and
either shuts down or flushes the queue (dropping the data)
and continues.
For advanced users only.
-->
<maxqueuelength>80</maxqueuelength>
<!-- Live encoding/reencoding:
Currrently, the parameters given here for encoding MUST
match the input data for channels and sample rate. That
restriction will be relaxed in the future.
-->
<encode>
<nominal-bitrate>64000</nominal-bitrate> <!-- bps. e.g. 64000 for 64 kbps -->
<samplerate>44100</samplerate>
<channels>2</channels>
</encode>
</instance>
</stream>
</ices>
1个回答
1
投票
投票
Ices 仅在您想播放播放列表时使用。这是一个源客户端。如果您使用的是不同的源客户端，请对其进行配置。
一旦源客户端运行，挂载点就会出现。
最新问题
- 如何计算日期的加权平均值？
- Python Tkinter 弹出窗口运行，但仅有时出现
- VS Code 中特定于笔记本的设置
- 如何解决 eas iOS 构建期间的“脚本具有不明确的依赖关系”错误
- 寻找素数的C程序
- 仅对手风琴使用CSS引导程序
- 是否可以在内联方法或子句中发出动态生成的编译器错误消息？
- 从私人 Github Issues 下载文件（而不是从存储库！）
- 在Shadcn React Hook Form和Zod中将可为空或未定义的字符串预处理
- 我想在 Flutter 中执行 Go 脚本。有什么可行的方法吗？
- 只要侧边栏不在固定位置，它就会落到页面底部
- Reactjs 使用react-markdown 覆盖markdown 类型
- 如何使用 wget 下载 google colab 上的共享项目？
- NextJS：即使使用 useEffect，仍然触发“窗口未定义”错误
- 为什么Java的字符串模板使用笨拙的STR前缀？
- 无法使用opencv在图像中找到表格位置
- 在xv6中swtch.s返回到哪里？
- 当我制作 setupProxy.js 时，本地主机拒绝连接
- 我无法从 mujoco py 修改 xml 文件
- Css + Javascript 视差效果 Z 值不起作用
© www.soinside.com 2019 - 2024. All rights reserved.