通过使用MCP3002模数转换器控制LED的亮度

Question

我正在尝试通过使用PWMLED和电位计来控制MCP3002 ADC亮度的列表。

我的问题是，当我运行脚本时，所有功能均按预期运行，除了连接到MCP3002 ADC的电位计，当我调整旋钮时，它不会调整PWMLED的亮度。

这是我的代码：

#!/usr/bin/python3

from gpiozero import PWMLED, Button, MCP3002
from threading import Thread
from signal import pause
from time import sleep
LEDs = [PWMLED(5), PWMLED(17), PWMLED(22), PWMLED(19), PWMLED(26)]
potentiometer = MCP3002(0)
pushButton = Button(21)
SPEED = 0.03


def analogRead():              # Now this function is working
    while True:                # the potentiometer value gets
    global LEDs                # displayed on the screen and it changes as
    print("analogRead called") # I adjust the knob but the ledSequnce() lights keep
    for PWMLED in LEDs:        # flickering, and the sequence gets interrupted
        if potentiometer.value < 0.02:
            PWMLED.value = 0
        else:
            PWMLED.value = potentiometer.value
        print(potentiometer.value)
        sleep(0.1)


def speedCounter():
    global SPEED
    if SPEED < 0.4:
        SPEED += 0.1
    else:
        SPEED = 0.03


def ledSequence():
    while True:
        for PWMLED in LEDs:
            PWMLED.on()
            sleep(SPEED)
            PWMLED.off()
        for PWMLED in reversed(LEDs):
            PWMLED.on()
            sleep(SPEED)
            PWMLED.off()


try:
    pushButton.when_pressed = speedCounter
    ledFlash = Thread(target=ledSequence, daemon=True)
    ledFlash.start()
    pot = Thread(target=analogRead, daemon=True)
    pot.start()
    pause()

except KeyboardInterrupt:
    exit(1)

但是当我尝试使用此脚本时，它就可以正常工作：

#!/usr/bin/python3

from gpiozero import PWMLED, MCP3002
from time import sleep

pot = MCP3002(0)
led = [PWMLED(5), PWMLED(17), PWMLED(22), PWMLED(19), PWMLED(26)]
while True:
    for PWMLED in led:
        if pot.value < 0.02:
            PWMLED.value = 0
        else:
            PWMLED.value = pot.value

        print(pot.value)
        sleep(0.1)

非常感谢您的帮助！

Answer 1

我找到了解决问题的方法。所以，我认为我应该在这里发布！

#!/usr/bin/python3

from gpiozero import PWMLED, Button, MCP3002
from threading import Thread
from signal import pause
from time import sleep
LEDs = [PWMLED(5), PWMLED(17), PWMLED(22), PWMLED(19), PWMLED(26)]
potentiometer = MCP3002(0)
pushButton = Button(21)
SPEED = 0.03


def speedCounter():
    global SPEED
    if SPEED < 0.4:
        SPEED += 0.1
    else:
        SPEED = 0.03


def ledSequence():
    while True:
        for PWMLED in LEDs:
            PWMLED.on()
            PWMLED.value = potentiometer.value
            sleep(SPEED)
            PWMLED.off()
        for PWMLED in reversed(LEDs):
            PWMLED.on()
            PWMLED.value = potentiometer.value
            sleep(SPEED)
            PWMLED.off()


try:
    pushButton.when_pressed = speedCounter
    ledFlash = Thread(target=ledSequence, daemon=True)
    ledFlash.start()
    pause()

except KeyboardInterrupt:
    exit(1)