我正在遵循建议：
可以通过将所需类的驱动程序组合到一个类中来实现自己的复合USB设备，该类位于您自己的文件夹中：Middlewares \ ST \ STM32_USB Device Library \ Class
来自https://community.st.com/s/question/0D50X00009XkgYtSAJ/stm32f4-hal-composite-usb-device-example
我现在有一个统一的配置描述符。
/* USB CDC device Configuration Descriptor */
__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
{
/*Configuration Descriptor*/
0x09, /* bLength: Configuration Descriptor size */
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
0x00,
0x03, /* bNumInterfaces: 2 interface */
0x01, /* bConfigurationValue: Configuration value */
0x00, /* iConfiguration: Index of string descriptor describing the configuration */
0xC0, /* bmAttributes: self powered */
0x32, /* MaxPower 0 mA */
/*---------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////
//Add 1 IAD class here // this one is for COM port
0x08, // bLength: Interface Descriptor size
0x0B, // bDescriptorType: IAD
0x00, // bFirstInterface //starting of interface
0x02, // bInterfaceCount //interfaces under this IAD class
0x02, // bFunctionClass: CDC
0x02, // bFunctionSubClass
0x01, // bFunctionProtocol
0x02, // iFunction
//////////////////////////////////////////////////////////////////////////////////////
/*Interface Descriptor */
0x09, /* bLength: Interface Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
/* Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints: One endpoints used */
0x02, /* bInterfaceClass: Communication Interface Class */
0x02, /* bInterfaceSubClass: Abstract Control Model */
0x01, /* bInterfaceProtocol: Common AT commands */
0x00, /* iInterface: */
/*Header Functional Descriptor*/
0x05, /* bLength: Endpoint Descriptor size */
0x24, /* bDescriptorType: CS_INTERFACE */
0x00, /* bDescriptorSubtype: Header Func Desc */
0x10, /* bcdCDC: spec release number */
0x01,
/*Call Management Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x01, /* bDescriptorSubtype: Call Management Func Desc */
0x00, /* bmCapabilities: D0+D1 */
0x01, /* bDataInterface: 1 */
/*ACM Functional Descriptor*/
0x04, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
0x02, /* bmCapabilities */
/*Union Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x06, /* bDescriptorSubtype: Union func desc */
0x00, /* bMasterInterface: Communication class interface */
0x01, /* bSlaveInterface0: Data Class Interface */
/*Endpoint 2 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_CMD_EP, /* bEndpointAddress */
0x03, /* bmAttributes: Interrupt */
LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_CMD_PACKET_SIZE),
CDC_FS_BINTERVAL, /* bInterval: */
/*---------------------------------------------------------------------------*/
/*Data class interface descriptor*/
0x09, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
0x01, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints: Two endpoints used */
0x0A, /* bInterfaceClass: CDC */
0x00, /* bInterfaceSubClass: */
0x00, /* bInterfaceProtocol: */
0x00, /* iInterface: */
/*Endpoint OUT Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_OUT_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
0x00, /* bInterval: ignore for Bulk transfer */
/*Endpoint IN Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_IN_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
0x00, /* bInterval: ignore for Bulk transfer */
///////////////////////////////////////////////////////////////////////////////////////////////
// IAD Mouse
0x08, // bLength: Interface Descriptor size
0x0B, // bDescriptorType: IAD
0x02, // bFirstInterface //starts from zero .. hence 0-1- and now 2
0x01, // bInterfaceCount //no of interfaces used in function. for above cdc it was 2
0x03, //*bInterfaceClass: HID*/
0x01, //*bInterfaceSubClass : 1=BOOT, 0=no boot*/
0x02, //*nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse*/
0x02, //*iInterface: Index of string descriptor*/
////////////////////////////////////////////////////////////////////////////////////////////////
/************** Descriptor of Joystick Mouse interface ****************/
/* 09 */
0x09, /*bLength: Interface Descriptor size*/
USB_DESC_TYPE_INTERFACE,/*bDescriptorType: Interface descriptor type*/
0x02, /*bInterfaceNumber: Number of Interface*/
0x00, /*bAlternateSetting: Alternate setting*/
0x01, /*bNumEndpoints*/
0x03, /*bInterfaceClass: HID*/
0x01, /*bInterfaceSubClass : 1=BOOT, 0=no boot*/
0x02, /*nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse*/
0x02, /*iInterface: Index of string descriptor*/
/******************** Descriptor of Joystick Mouse HID ********************/
/* 18 */
0x09, /*bLength: HID Descriptor size*/
HID_DESCRIPTOR_TYPE, /*bDescriptorType: HID*/
0x11, /*bcdHID: HID Class Spec release number*/
0x01,
0x00, /*bCountryCode: Hardware target country*/
0x01, /*bNumDescriptors: Number of HID class descriptors to follow*/
0x22, /*bDescriptorType*/
HID_MOUSE_REPORT_DESC_SIZE,/*wItemLength: Total length of Report descriptor*/
0x00,
/******************** Descriptor of Mouse endpoint ********************/
/* 27 */
0x07, /*bLength: Endpoint Descriptor size*/
USB_DESC_TYPE_ENDPOINT, /*bDescriptorType:*/
HID_EPIN_ADDR, /*bEndpointAddress: Endpoint Address (IN)*/
0x03, /*bmAttributes: Interrupt endpoint*/
HID_EPIN_SIZE, /*wMaxPacketSize: 4 Byte max */
0x00,
HID_FS_BINTERVAL, /*bInterval: Polling Interval */
/* 34 */
} ;
和统一的初始化：
static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
uint8_t ret = 0U;
USBD_CDC_HandleTypeDef *hcdc;
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
/* Open EP IN */
USBD_LL_OpenEP(pdev, CDC_IN_EP, USBD_EP_TYPE_BULK,
CDC_DATA_HS_IN_PACKET_SIZE);
pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 1U;
/* Open EP OUT */
USBD_LL_OpenEP(pdev, CDC_OUT_EP, USBD_EP_TYPE_BULK,
CDC_DATA_HS_OUT_PACKET_SIZE);
pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 1U;
}
else
{
/* Open EP IN */
USBD_LL_OpenEP(pdev, CDC_IN_EP, USBD_EP_TYPE_BULK,
CDC_DATA_FS_IN_PACKET_SIZE);
pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 1U;
/* Open EP OUT */
USBD_LL_OpenEP(pdev, CDC_OUT_EP, USBD_EP_TYPE_BULK,
CDC_DATA_FS_OUT_PACKET_SIZE);
pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 1U;
}
/* Open Command IN EP */
USBD_LL_OpenEP(pdev, CDC_CMD_EP, USBD_EP_TYPE_INTR, CDC_CMD_PACKET_SIZE);
pdev->ep_in[CDC_CMD_EP & 0xFU].is_used = 1U;
pdev->pClassData = USBD_malloc(sizeof(USBD_CDC_HandleTypeDef));
if (pdev->pClassData == NULL)
{
ret = 1U;
}
else
{
hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
/* Init physical Interface components */
((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init();
/* Init Xfer states */
hcdc->TxState = 0U;
hcdc->RxState = 0U;
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
/* Prepare Out endpoint to receive next packet */
USBD_LL_PrepareReceive(pdev, CDC_OUT_EP, hcdc->RxBuffer,
CDC_DATA_HS_OUT_PACKET_SIZE);
}
else
{
/* Prepare Out endpoint to receive next packet */
USBD_LL_PrepareReceive(pdev, CDC_OUT_EP, hcdc->RxBuffer,
CDC_DATA_FS_OUT_PACKET_SIZE);
}
}
// HID
/* Open EP IN */
USBD_LL_OpenEP(pdev, HID_EPIN_ADDR, USBD_EP_TYPE_INTR, HID_EPIN_SIZE);
pdev->ep_in[HID_EPIN_ADDR & 0xFU].is_used = 1U;
pdev->pClassData = USBD_malloc(sizeof(USBD_HID_HandleTypeDef));
if (pdev->pClassData == NULL)
{
return USBD_FAIL;
}
((USBD_HID_HandleTypeDef *)pdev->pClassData)->state = HID_IDLE;
return ret;
}
我担心CDC_IN_EP（0x81）的值与HID_EPIN_ADDR（也是0x81）相冲突。
这是一个有效的问题吗？
是否有使用CubeMX制作复合CDC / HID的示例？
0x83作为HID端点。我确认这也适用于简单的HID示例。在STM32上获得可用的CDC / HID复合设备的方式还有很多其他障碍。