这就是我能找到的全部，它们都不起作用。
选项比较数据库选项显式
Private Type DOCINFO
pDocName As String
pOutputFile As String
pDatatype As String
End Type
Private Declare Function ClosePrinter Lib "winspool.drv" (ByVal _
hPrinter As Long) As Long
Private Declare Function EndDocPrinter Lib "winspool.drv" (ByVal _
hPrinter As Long) As Long
Private Declare Function EndPagePrinter Lib "winspool.drv" (ByVal _
hPrinter As Long) As Long
Private Declare Function OpenPrinter Lib "winspool.drv" Alias _
"OpenPrinterA" (ByVal pPrinterName As String, phPrinter As Long, _
ByVal pDefault As Long) As Long
Private Declare Function StartDocPrinter Lib "winspool.drv" Alias _
"StartDocPrinterA" (ByVal hPrinter As Long, ByVal Level As Long, _
pDocInfo As DOCINFO) As Long
Private Declare Function StartPagePrinter Lib "winspool.drv" (ByVal _
hPrinter As Long) As Long
Private Declare Function WritePrinter Lib "winspool.drv" (ByVal _
hPrinter As Long, pBuf As Any, ByVal cdBuf As Long, _
pcWritten As Long) As Long
Private Sub TEST()
Dim lhPrinter As Long
Dim lReturn As Long
Dim lpcWritten As Long
Dim lDoc As Long
Dim sWrittenData As String
Dim MyDocInfo As DOCINFO
lReturn = OpenPrinter("ZDesigner LP 2844", lhPrinter, 0)
If lReturn = 0 Then
MsgBox "The Printer Name you typed wasn't recognized."
Exit Sub
End If
MyDocInfo.pDocName = "AAAAAA"
MyDocInfo.pOutputFile = vbNullString
MyDocInfo.pDatatype = vbNullString
lDoc = StartDocPrinter(lhPrinter, 1, MyDocInfo)
Call StartPagePrinter(lhPrinter)
sWrittenData = "N" & vbFormFeed
sWrittenData = sWrittenData & "q609" & vbFormFeed
sWrittenData = sWrittenData & "Q203,26" & vbFormFeed
sWrittenData = sWrittenData & "B26,26,0,UA0,2,2,152,B," & Chr(34) & "603679025109" & Chr(34) & vbFormFeed
sWrittenData = sWrittenData & "A253,26,0,3,1,1,N," & Chr(34) & "SKU 6205518 MFG 6354" & Chr(34) & vbFormFeed
sWrittenData = sWrittenData & "A253,56,0,3,1,1,N," & Chr(34) & "2XIST TROPICAL BEACH" & Chr(34) & vbFormFeed
sWrittenData = sWrittenData & "A253,86,0,3,1,1,N," & Chr(34) & "STRIPE SQUARE CUT TRUNK" & Chr(34) & vbFormFeed
sWrittenData = sWrittenData & "A253,116,0,3,1,1,N," & Chr(34) & "BRICK" & Chr(34) & vbFormFeed
sWrittenData = sWrittenData & "A253,146,0,3,1,1,N," & Chr(34) & "X-LARGE" & Chr(34) & vbFormFeed
sWrittenData = sWrittenData & "P1,1" & vbFormFeed
lReturn = WritePrinter(lhPrinter, ByVal sWrittenData, _
Len(sWrittenData), lpcWritten)
lReturn = EndPagePrinter(lhPrinter)
lReturn = EndDocPrinter(lhPrinter)
lReturn = ClosePrinter(lhPrinter)
End Sub
方法2
Option Compare Database
Private Sub crtLabel()
Dim prtDevice As String
Dim strQuote As String
strQuote = Chr(34)
prtDevice = "ZDesigner LP 2844" ' whatever device Access currently has as the default. I have the user select a printer prior to printing, which sets the Access defaut printer
' open printer port
Open prtDevice For Output As #1
' initialize printer
Print #1, "OD" & vbCrLf
Print #1, "N" & vbCrLf
Print #1, "O" & vbCrLf
Print #1, "Q545,B12+23" & vbCrLf
Print #1, "q262" & vbCrLf
Print #1, "UN" & vbCrLf
Print #1, "rN" & vbCrLf
Print #1, "N" & vbCrLf
Print #1, "A4,94,3,3,1,1,N," & strQuote & "1803" & strQuote & vbCrLf
Print #1, "A36,74,3,3,1,1,N," & strQuote & "B" & strQuote & vbCrLf
Print #1, "A64,94,3,3,1,1,N," & strQuote & "079" & strQuote & vbCrLf
Print #1, "A112,8,0,2,1,1,N," & strQuote & strQuote & vbCrLf ' you can replace any string like "1803" with a string variable like SID or AID that gets passed to the sub
Print #1, "A112,32,0,3,1,1,N," & strQuote & strQuote & vbCrLf ' same here
Print #1, "A112,64,0,1,1,1,N," & strQuote & "04/13/2009" & strQuote & vbCrLf
Print #1, "A130,100,0,1,1,1,N," & strQuote & "SWAB, NASO" & strQuote & vbCrLf
Print #1, "A4,100,0,1,1,1,N," & strQuote & "C146536" & strQuote & vbCrLf
Print #1, "B53,130,0,1,1,0,47,N," & strQuote & "2009-06868" & strQuote & vbCrLf
Print #1, "A112,188,0,1,1,1,N," & strQuote & "" & strQuote & vbCrLf
Print #1, "P1,1" & vbCrLf
Print #1, "O" & vbCrLf
' close printer port
Close #1
End Sub
运行该功能后没有任何反应。这就像打印机根本没有被代码触及。
更新方法1是我打印文件最接近的方法。执行命令后，状态栏上显示一个打印机图标，表示打印机已被调用并从我的代码接收数据，但仍然没有打印。救命...
如果它映射到并行或COM端口，您可以直接打开它：
open "LPT1:" For Output as #1
' or open "COM1:"
print #1, "SomeData"
Close #1
我喜欢做的是做类似于方法2的操作，但将其保存到文件（原始打印机数据），然后将文件复制到UNC路径。
文件副本“C：\ label.txt”\ computername \ sharename
这对我行得通。
好的，这就是我设法得到这项工作的方式。不是我想要的最好的选择，但......它的工作原理。
1）我使用相同的函数，但用C ++编写，取自http://support.microsoft.com/kb/138594/EN-US
// RawDataToPrinter - sends binary data directly to a printer
//
// Params:
// szPrinterName - NULL terminated string specifying printer name
// lpData - Pointer to raw data bytes
// dwCount - Length of lpData in bytes
//
// Returns: TRUE for success, FALSE for failure.
//
BOOL RawDataToPrinter(LPSTR szPrinterName, LPBYTE lpData, DWORD dwCount)
{
HANDLE hPrinter;
DOC_INFO_1 DocInfo;
DWORD dwJob;
DWORD dwBytesWritten;
// Need a handle to the printer.
if( ! OpenPrinter( szPrinterName, &hPrinter, NULL ) )
return FALSE;
// Fill in the structure with info about this "document."
DocInfo.pDocName = "My Document";
DocInfo.pOutputFile = NULL;
DocInfo.pDatatype = "RAW";
// Inform the spooler the document is beginning.
if( (dwJob = StartDocPrinter( hPrinter, 1, (LPSTR)&DocInfo )) == 0 )
{
ClosePrinter( hPrinter );
return FALSE;
}
// Start a page.
if( ! StartPagePrinter( hPrinter ) )
{
EndDocPrinter( hPrinter );
ClosePrinter( hPrinter );
return FALSE;
}
// Send the data to the printer.
if( ! WritePrinter( hPrinter, lpData, dwCount, &dwBytesWritten ) )
{
EndPagePrinter( hPrinter );
EndDocPrinter( hPrinter );
ClosePrinter( hPrinter );
return FALSE;
}
// End the page.
if( ! EndPagePrinter( hPrinter ) )
{
EndDocPrinter( hPrinter );
ClosePrinter( hPrinter );
return FALSE;
}
// Inform the spooler that the document is ending.
if( ! EndDocPrinter( hPrinter ) )
{
ClosePrinter( hPrinter );
return FALSE;
}
// Tidy up the printer handle.
ClosePrinter( hPrinter );
// Check to see if correct number of bytes were written.
if( dwBytesWritten != dwCount )
return FALSE;
return TRUE;
}
我从那里得到文件RAWPRN.EXE，把我的EPL代码放在一个txt文件中。最后，使用Shell执行它
Dim RetVal
RetVal = Shell("cmd .exe /c C:\rawprint\RawPrint.exe ""ZDesigner LP 2844"" ""C:\eplcode.txt""", 1)
我的Zebra解决方案