libusb批量读取每次返回相同的aswer

Question

我正在运行下面的程序，该程序可与我的某些设备配合使用，但是在初始化，打开，声明和批量（写）正常工作后，其中三个设备正常运行，批量（读）在应答缓冲区中返回0x01 0x60。实际上，我发送的内容无关紧要。打开USB后，如果我尝试bulk_read ...我每次都会得到这个答案（即使是无限循环）。可以是什么？

int main() {
    libusb_device **devs; // Pointer to pointer of device, used to retrieve a list of devices
    libusb_device_handle *dev_handle; // A device handle
    libusb_context *ctx = NULL; // A libusb session
    struct libusb_control_setup setup;

    int r; // For return values
    int i = 0;
    int iCmdLen_BCR = 6;
    int iCmdLen = 0;
    int actual = 0; // Used to find out how many bytes were written

    ssize_t cnt; // Holding number of devices in list

    unsigned char sRsp[1024];
    unsigned char sAux[1024];
    unsigned char data[128];
    unsigned char data_BCR[128]; // Data to write

    memset(data, 0, sizeof(data));
    memset(data_BCR, 0, sizeof(data_BCR));
    memset(sRsp, 0, sizeof(sRsp));
    memset(sAux, 0, sizeof(sAux));


    r = libusb_init(&ctx); // Initialize the library for the session we just declared
    if(r < 0) {
        printf("[%04d] Init Error [%d]\n", __LINE__, r); // There was an error
        return 1;
    }
    libusb_set_debug(ctx, 3); // Set verbosity level to 3, as suggested in the documentation
    cnt = libusb_get_device_list(ctx, &devs); // Get the list of devices
    if(cnt < 0) {
        printf("[%04d] Get Device Error\n", __LINE__); // There was an error
        return 1;
    }
    printf("[%04d] Devices in list.\n", __LINE__);
    dev_handle = libusb_open_device_with_vid_pid(ctx, VD_ID_BCR, PD_ID_BCR); // These are vendorID and productID I found for my usb device
    if(dev_handle == NULL)
        printf("[%04d] Cannot open device\n", __LINE__);
    else
        printf("[%04d] Device Opened\n", __LINE__);
    libusb_free_device_list(devs, 1); // Free the list, unref the devices in it


    if(libusb_kernel_driver_active(dev_handle, 0) == 1) { // Find out if kernel driver is attached
        printf("[%04d] Kernel Driver Active\n", __LINE__);
        if(libusb_detach_kernel_driver(dev_handle, 0) == 0) // Detach it
            printf("[%04d] Kernel Driver Detached!\n", __LINE__);
    }

    r = libusb_claim_interface(dev_handle, 0); // Claim interface 0 (the first) of device (mine had jsut 1)
    if(r < 0) {
        printf("[%04d] Cannot Claim Interface\n", __LINE__);
        return 1;
    }
    printf("[%04d] Claimed Interface r[%d]\n", __LINE__, r);

    memcpy(data_BCR, "\x04\xC8\x04\x00\xFF\x30", iCmdLen_BCR);
    memcpy(data, data_BCR, iCmdLen_BCR);
    iCmdLen = iCmdLen_BCR;

    r = libusb_bulk_transfer(dev_handle, (2 | LIBUSB_ENDPOINT_OUT), data, iCmdLen, &actual, 0); // My device's out endpoint was 2, found with trial- the device had 2 endpoints: 2 and 129
    if(r >= 0)
    {
        printf("[%04d] Writing Successful!\n", __LINE__);
        r = libusb_bulk_transfer(dev_handle, 0x81, sRsp, 1024, &actual, 10000);
        for(i=0; i<actual ; i++)
        {
          sprintf(sAux+strlen(sAux), "%02X ", sRsp[i]);
        }
        printf("[%04d] result bulk read[%d] actual[%d] Rsp[%s]\n", __LINE__, r, actual, sAux);
    }
    else
    {
        printf("[%04d] Write Error\n", __LINE__);
    }
    r = libusb_release_interface(dev_handle, 0); // Release the claimed interface
    if(r!=0) {
        printf("[%04d] Cannot Release Interface\n", __LINE__);
        return 1;
    }
    printf("[%04d] Released Interface\n", __LINE__);
    libusb_close(dev_handle); // Close the device we opened
    libusb_exit(ctx); // Needs to be called to end the
    //delete[] data; // Delete the allocated memory for data
    return 0;
}

Answer 1

您找到任何解决方案了吗？