我有2个lora-ra02（SX1278）模块来发送/接收数据。发送方使用STM32f103C8t6，接收方使用Raspberry Pi 3 B +。
STM32f103C8T6-> LORA-RA02 LORA-RA02-> RASPBERRY PI 3 B +
现在，我将“ Hello”从STM32发送到Raspberry，但不幸的是我收到了混乱的词。
这是我的代码：ARDUINO IDE上的STM32代码：
/*
LoRaLib Transmit Example
This example transmits LoRa packets with one second delays
between them. Each packet contains up to 256 bytes
of data, in the form of:
- Arduino String
- null-terminated char array (C-string)
- arbitrary binary data (byte array)
For more detailed information, see the LoRaLib Wiki
https://github.com/jgromes/LoRaLib/wiki
For full API reference, see the GitHub Pages
https://jgromes.github.io/LoRaLib/
*/
// include the library
#include <LoRaLib.h>
// create instance of LoRa class using SX1278 module
// this pinout corresponds to RadioShield
// https://github.com/jgromes/RadioShield
// NSS pin: 10 (4 on ESP32/ESP8266 boards)
// DIO0 pin: 2
// DIO1 pin: 3
SX1278 lora = new LoRa;
void setup() {
Serial.begin(9600);
// initialize SX1278 with default settings
Serial.print(F("Initializing ... "));
// carrier frequency: 434.0 MHz
// bandwidth: 125.0 kHz
// spreading factor: 9
// coding rate: 7
// sync word: 0x12
// output power: 17 dBm
// current limit: 100 mA
// preamble length: 8 symbols
// amplifier gain: 0 (automatic gain control)
int state = lora.begin();
if (state == ERR_NONE) {
Serial.println(F("success!"));
} else {
Serial.print(F("failed, code "));
Serial.println(state);
while (true);
}
}
void loop() {
Serial.print(F("Sending packet ... "));
// you can transmit C-string or Arduino string up to
// 256 characters long
// NOTE: transmit() is a blocking method!
// See example TransmitInterrupt for details
// on non-blocking transmission method.
int state = lora.transmit("Hello");
// you can also transmit byte array up to 256 bytes long
/*
size_t len = 8;
byte byteArr[len] = {0x01, 0x23, 0x45, 0x56,
0x78, 0xAB, 0xCD, 0xEF};
int state = lora.transmit(byteArr, len);
*/
if (state == ERR_NONE) {
// the packet was successfully transmitted
Serial.println(F(" success!"));
// print measured data rate
Serial.print(F("Datarate:\t"));
Serial.print(lora.getDataRate());
Serial.println(F(" bps"));
} else if (state == ERR_PACKET_TOO_LONG) {
// the supplied packet was longer than 256 bytes
Serial.println(F(" too long!"));
} else if (state == ERR_TX_TIMEOUT) {
// timeout occurred while transmitting packet
Serial.println(F(" timeout!"));
}
// wait a second before transmitting again
delay(1000);
}
这是Raspberry Pi代码：
#!/usr/bin/env python3
""" This program sends a response whenever it receives the "INF" """
# Copyright 2018 Rui Silva.
#
# This file is part of rpsreal/pySX127x, fork of mayeranalytics/pySX127x.
#
# pySX127x is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public
# License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later
# version.
#
# pySX127x is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
# details.
#
# You can be released from the requirements of the license by obtaining a commercial license. Such a license is
# mandatory as soon as you develop commercial activities involving pySX127x without disclosing the source code of your
# own applications, or shipping pySX127x with a closed source product.
#
# You should have received a copy of the GNU General Public License along with pySX127. If not, see
# <http://www.gnu.org/licenses/>.
import time
from SX127x.LoRa import *
#from SX127x.LoRaArgumentParser import LoRaArgumentParser
from SX127x.board_config import BOARD
BOARD.setup()
BOARD.reset()
#parser = LoRaArgumentParser("Lora tester")
class mylora(LoRa):
def __init__(self, verbose=False):
super(mylora, self).__init__(verbose)
self.set_mode(MODE.RXCONT)
self.set_dio_mapping([0] * 6)
def on_rx_done(self):
BOARD.led_on()
print("\nRxDone")
self.clear_irq_flags(RxDone=1)
payload = self.read_payload(nocheck=True)
print ("Received: ")
mens=bytes(payload).decode("utf-8", 'ignore')
print(mens)
BOARD.led_off()
time.sleep(2)
self.reset_ptr_rx()
self.set_mode(MODE.RXCONT)
def on_tx_done(self):
print("\nTxDone")
print(self.get_irq_flags())
def on_cad_done(self):
print("\non_CadDone")
print(self.get_irq_flags())
def on_rx_timeout(self):
print("\non_RxTimeout")
print(self.get_irq_flags())
def on_valid_header(self):
print("\non_ValidHeader")
print(self.get_irq_flags())
def on_payload_crc_error(self):
print("\non_PayloadCrcError")
print(self.get_irq_flags())
def on_fhss_change_channel(self):
print("\non_FhssChangeChannel")
print(self.get_irq_flags())
def start(self):
while True:
self.reset_ptr_rx()
self.set_mode(MODE.RXCONT) # Receiver mode
while True:
pass;
lora = mylora(verbose=True)
#args = parser.parse_args(lora) # configs in LoRaArgumentParser.py
# Slow+long range Bw = 125 kHz, Cr = 4/8, Sf = 4096chips/symbol, CRC on. 13 dBm
lora.set_pa_config(pa_select=1, max_power=21, output_power=17)
lora.set_bw(BW.BW125)
lora.set_coding_rate(CODING_RATE.CR4_7)
lora.set_spreading_factor(9)
lora.set_rx_crc(True)
lora.set_low_data_rate_optim(True)
print (lora.get_version())
# Medium Range Defaults after init are 434.0MHz, Bw = 125 kHz, Cr = 4/5, Sf = 128chips/symbol, CRC on 13 dBm
#lora.set_pa_config(pa_select=1)
assert(lora.get_agc_auto_on() == 1)
try:
print("START lora")
lora.start()
except KeyboardInterrupt:
sys.stdout.flush()
print("Exit")
sys.stderr.write("KeyboardInterrupt\n")
finally:
sys.stdout.flush()
print("Exit")
lora.set_mode(MODE.SLEEP)
BOARD.teardown()
这是Raspberry Pi（接收器）上正在运行的代码的输出：
所以，现在我不知道我的问题在哪里，我该怎么办？有什么建议吗？
在对代码进行了一些挑战之后，按照人们所说的进行更改，我没有得到正确的输出。
最后，我稍微搜索了另一个代码，并找到了正确的输出：
https://github.com/YandievRuslan/sx1278-LoRa-RaspberryPi
它正在工作，但不幸的是它是C编程，如果可能，我需要将其更改为python代码。
我没有找到答案，但是我希望这段代码可以帮助想要获得正确输出的任何人。
非常感谢对我的问题发表评论的人们。