ESP：自动登录/ OS通过接受消息重定向页面，例如公共WIFI门户接入点

问题描述 投票：0回答：1

例：

我不知道你怎么称呼这个功能，所以我试图解释它。例如，当你将手机连接到公共WiFi热点/接入点，您会收到来自它需要接受条款/条件OS的消息，或者您需要登录才能够使用该连接。当你点击到这个消息时，它会打开/浏览器和发射着陆页。

他们怎么做到的？这是一个HTTPS的功能？

更新：（1）

这就是所谓的强制门户：

圈养门户技术，强制网络上的HTTP客户端通常使用Internet之前看到一个专题网页（通常用于认证目的）。强制门户打开Web浏览器到认证设备。这是通过拦截大多数包做，不管地址或端口，直到用户打开浏览器并尝试访问网络。当时的浏览器重定向到一个网页，可能需要身份验证和/或付款，或者干脆显示一个可接受的使用政策，并要求用户同意。圈养门户在许多Wi-Fi热点使用，可用于控制有线接入（例如公寓住宅，酒店式公寓，商务中心“打开”以太网插孔）为好。

情况：

我想要做同样与ESP（ESP32 / ESP8266），因为我开发可以通过WiFi可配置的设备。当用户连接到该设备，并不必首先打开浏览器，输入一个IP地址等，就在消息这将是非常人性化，用户可以点击它和主页将启动。

在AP模式下，我已经启用了DNS和重定向一切主页然而，这不是最好的解决方法（有时也不起作用）。为了给你一些想法我在做什么，这里的一些代码，我的图书馆的一部分：

bool suStartAccessPointNetwork( String  sSSIDNetworkName, String   sSSIDPassword,
                                IPAddress sStaticIpAddress,
                                uint16_t iDnsPort = 0,
                                uint8_t iTries = 20, 
                                uint16_t iDelay = 500 
                              )
{ 
  WiFi.disconnect();
  suSetNetworkAccessPointMode();
  delay( 1000 );
  WiFi.softAPConfig( sStaticIpAddress,
                       sStaticIpAddress,
                       IPAddress( 255, 255, 255, 0 )
                     ); 

  SU_WIFI_AP_ESTABLISHED = WiFi.softAP( sSSIDNetworkName.c_str(), sSSIDPassword.c_str() );

  if( iDnsPort > 0 )
  {
       static SUDNSServer* pDnsServer = NULLPTR;

       if( !pDnsServer )
        { pDnsServer = new SUDNSServer(); }

       // modify TTL, default is 60 seconds
       pDnsServer->setTTL(60);

       // set which return code will be used for all other domains (e.g. sending
       // ServerFailure instead of NonExistentDomain will reduce number of queries
       // sent by clients)
       // default is DNSReplyCode::NonExistentDomain
       pDnsServer->setErrorReplyCode( DNSReplyCode::NoError );
       pDnsServer->start( iDnsPort, 
                        //SCDMS_MDNS_ACCESS_NAME, 
                        "*", 
                        sStaticIpAddress
                       );

       Serial.print("DNS server started at " );
       Serial.println( sStaticIpAddress ); 

       suSetDnsServer( pDnsServer );
  } 


  Serial.print("[AP]:");

  bool bConnected = false;

  if( iTries == 0 )
   { ++iTries; } 

   // Try to connect, give WiFi 10 seconds to launch a network as access point.
  while( !(bConnected = suIsNetworkEstablished()) && (iTries--) )
  {
      Serial.print('.');
      //Serial.print(WiFi.status());
      delay(500);
  }

  if( bConnected )
   { SU_WIFI_AP_ESTABLISHED = bConnected; }

  Serial.println( bConnected?" ((o))":" o?" );


  return bConnected;
}

题：

我如何能实现这样的功能，如上面的例子说明？有任何想法吗？是否有可能呢？

--------------------

更新2：

@gre_gor想出我知道服务的名称（也见更新1）后也发现了同样的例子。实施URL路径等像在实施例中，如上所述不工作。好了，试了完整的例子，同样的结果，没有OS弹出/消息，没有重定向。在浏览器中输入IP-ADRESS，这是工作但是同样我已经有了。

一个扩展演示的我已经试过的：

#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <DNSServer.h>
#include <ESP8266mDNS.h>
#include <EEPROM.h>

/*
   This example serves a "hello world" on a WLAN and a SoftAP at the same time.
   The SoftAP allow you to configure WLAN parameters at run time. They are not setup in the sketch but saved on EEPROM.
   Connect your computer or cell phone to wifi network ESP_ap with password 12345678. A popup may appear and it allow you to go to WLAN config. If it does not then navigate to http://192.168.4.1/wifi and config it there.
   Then wait for the module to connect to your wifi and take note of the WLAN IP it got. Then you can disconnect from ESP_ap and return to your regular WLAN.
   Now the ESP8266 is in your network. You can reach it through http://192.168.x.x/ (the IP you took note of) or maybe at http://esp8266.local too.
   This is a captive portal because through the softAP it will redirect any http request to http://192.168.4.1/
*/

/* Set these to your desired softAP credentials. They are not configurable at runtime */
#ifndef APSSID
#define APSSID "ESP_ap"
#define APPSK  "12345678"
#endif

const char *softAP_ssid = APSSID;
const char *softAP_password = APPSK;

/* hostname for mDNS. Should work at least on windows. Try http://esp8266.local */
const char *myHostname = "esp8266";

/* Don't set this wifi credentials. They are configurated at runtime and stored on EEPROM */
char ssid[32] = "";
char password[32] = "";

// DNS server
const byte DNS_PORT = 53;
DNSServer dnsServer;

// Web server
ESP8266WebServer server(80);

/* Soft AP network parameters */
IPAddress apIP(192, 168, 4, 1);
IPAddress netMsk(255, 255, 255, 0);


/** Should I connect to WLAN asap? */
boolean connect;

/** Last time I tried to connect to WLAN */
unsigned long lastConnectTry = 0;

/** Current WLAN status */
unsigned int status = WL_IDLE_STATUS;

/** Is this an IP? */
boolean isIp(String str) {
  for (size_t i = 0; i < str.length(); i++) {
    int c = str.charAt(i);
    if (c != '.' && (c < '0' || c > '9')) {
      return false;
    }
  }
  return true;
}

/** IP to String? */
String toStringIp(IPAddress ip) {
  String res = "";
  for (int i = 0; i < 3; i++) {
    res += String((ip >> (8 * i)) & 0xFF) + ".";
  }
  res += String(((ip >> 8 * 3)) & 0xFF);
  return res;
}

/** Load WLAN credentials from EEPROM */
void loadCredentials() {
  EEPROM.begin(512);
  EEPROM.get(0, ssid);
  EEPROM.get(0 + sizeof(ssid), password);
  char ok[2 + 1];
  EEPROM.get(0 + sizeof(ssid) + sizeof(password), ok);
  EEPROM.end();
  if (String(ok) != String("OK")) {
    ssid[0] = 0;
    password[0] = 0;
  }
  Serial.println("Recovered credentials:");
  Serial.println(ssid);
  Serial.println(strlen(password) > 0 ? "********" : "<no password>");
}

/** Store WLAN credentials to EEPROM */
void saveCredentials() {
  EEPROM.begin(512);
  EEPROM.put(0, ssid);
  EEPROM.put(0 + sizeof(ssid), password);
  char ok[2 + 1] = "OK";
  EEPROM.put(0 + sizeof(ssid) + sizeof(password), ok);
  EEPROM.commit();
  EEPROM.end();
}

/** Handle root or redirect to captive portal */
void handleRoot() {
  if (captivePortal()) { // If caprive portal redirect instead of displaying the page.
    return;
  }
  server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
  server.sendHeader("Pragma", "no-cache");
  server.sendHeader("Expires", "-1");

  String Page;
  Page += F(
            "<html><head></head><body>"
            "<h1>HELLO WORLD!!</h1>");
  if (server.client().localIP() == apIP) {
    Page += String(F("<p>You are connected through the soft AP: ")) + softAP_ssid + F("</p>");
  } else {
    Page += String(F("<p>You are connected through the wifi network: ")) + ssid + F("</p>");
  }
  Page += F(
            "<p>You may want to <a href='/wifi'>config the wifi connection</a>.</p>"
            "</body></html>");

  server.send(200, "text/html", Page);
}

/** Redirect to captive portal if we got a request for another domain. Return true in that case so the page handler do not try to handle the request again. */
boolean captivePortal() {
  if (!isIp(server.hostHeader()) && server.hostHeader() != (String(myHostname) + ".local")) {
    Serial.println("Request redirected to captive portal");
    server.sendHeader("Location", String("http://") + toStringIp(server.client().localIP()), true);
    server.send(302, "text/plain", "");   // Empty content inhibits Content-length header so we have to close the socket ourselves.
    server.client().stop(); // Stop is needed because we sent no content length
    return true;
  }
  return false;
}

/** Wifi config page handler */
void handleWifi() {
  server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
  server.sendHeader("Pragma", "no-cache");
  server.sendHeader("Expires", "-1");

  String Page;
  Page += F(
            "<html><head></head><body>"
            "<h1>Wifi config</h1>");
  if (server.client().localIP() == apIP) {
    Page += String(F("<p>You are connected through the soft AP: ")) + softAP_ssid + F("</p>");
  } else {
    Page += String(F("<p>You are connected through the wifi network: ")) + ssid + F("</p>");
  }
  Page +=
    String(F(
             "\r\n<br />"
             "<table><tr><th align='left'>SoftAP config</th></tr>"
             "<tr><td>SSID ")) +
    String(softAP_ssid) +
    F("</td></tr>"
      "<tr><td>IP ") +
    toStringIp(WiFi.softAPIP()) +
    F("</td></tr>"
      "</table>"
      "\r\n<br />"
      "<table><tr><th align='left'>WLAN config</th></tr>"
      "<tr><td>SSID ") +
    String(ssid) +
    F("</td></tr>"
      "<tr><td>IP ") +
    toStringIp(WiFi.localIP()) +
    F("</td></tr>"
      "</table>"
      "\r\n<br />"
      "<table><tr><th align='left'>WLAN list (refresh if any missing)</th></tr>");
  Serial.println("scan start");
  int n = WiFi.scanNetworks();
  Serial.println("scan done");
  if (n > 0) {
    for (int i = 0; i < n; i++) {
      Page += String(F("\r\n<tr><td>SSID ")) + WiFi.SSID(i) + ((WiFi.encryptionType(i) == ENC_TYPE_NONE) ? F(" ") : F(" *")) + F(" (") + WiFi.RSSI(i) + F(")</td></tr>");
    }
  } else {
    Page += F("<tr><td>No WLAN found</td></tr>");
  }
  Page += F(
            "</table>"
            "\r\n<br /><form method='POST' action='wifisave'><h4>Connect to network:</h4>"
            "<input type='text' placeholder='network' name='n'/>"
            "<br /><input type='password' placeholder='password' name='p'/>"
            "<br /><input type='submit' value='Connect/Disconnect'/></form>"
            "<p>You may want to <a href='/'>return to the home page</a>.</p>"
            "</body></html>");
  server.send(200, "text/html", Page);
  server.client().stop(); // Stop is needed because we sent no content length
}

/** Handle the WLAN save form and redirect to WLAN config page again */
void handleWifiSave() {
  Serial.println("wifi save");
  server.arg("n").toCharArray(ssid, sizeof(ssid) - 1);
  server.arg("p").toCharArray(password, sizeof(password) - 1);
  server.sendHeader("Location", "wifi", true);
  server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
  server.sendHeader("Pragma", "no-cache");
  server.sendHeader("Expires", "-1");
  server.send(302, "text/plain", "");    // Empty content inhibits Content-length header so we have to close the socket ourselves.
  server.client().stop(); // Stop is needed because we sent no content length
  saveCredentials();
  connect = strlen(ssid) > 0; // Request WLAN connect with new credentials if there is a SSID
}

void handleNotFound() {
  if (captivePortal()) { // If caprive portal redirect instead of displaying the error page.
    return;
  }
  String message = F("File Not Found\n\n");
  message += F("URI: ");
  message += server.uri();
  message += F("\nMethod: ");
  message += (server.method() == HTTP_GET) ? "GET" : "POST";
  message += F("\nArguments: ");
  message += server.args();
  message += F("\n");

  for (uint8_t i = 0; i < server.args(); i++) {
    message += String(F(" ")) + server.argName(i) + F(": ") + server.arg(i) + F("\n");
  }
  server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
  server.sendHeader("Pragma", "no-cache");
  server.sendHeader("Expires", "-1");
  server.send(404, "text/plain", message);
}

void setup() {
  delay(1000);
  Serial.begin(9600);
  Serial.println();
  Serial.println("Configuring access point...");
  /* You can remove the password parameter if you want the AP to be open. */
  WiFi.softAPConfig(apIP, apIP, netMsk);
  WiFi.softAP(softAP_ssid, softAP_password);
  delay(500); // Without delay I've seen the IP address blank
  Serial.print("AP IP address: ");
  Serial.println(WiFi.softAPIP());

  /* Setup the DNS server redirecting all the domains to the apIP */
  dnsServer.setErrorReplyCode(DNSReplyCode::NoError);
  dnsServer.start(DNS_PORT, "*", apIP);

  /* Setup web pages: root, wifi config pages, SO captive portal detectors and not found. */
  server.on("/", handleRoot);
  server.on("/wifi", handleWifi);
  server.on("/wifisave", handleWifiSave);
  server.on("/generate_204", handleRoot);  //Android captive portal. Maybe not needed. Might be handled by notFound handler.
  server.on("/fwlink", handleRoot);  //Microsoft captive portal. Maybe not needed. Might be handled by notFound handler.
  server.onNotFound(handleNotFound);
  server.begin(); // Web server start
  Serial.println("HTTP server started");
  loadCredentials(); // Load WLAN credentials from network
  connect = strlen(ssid) > 0; // Request WLAN connect if there is a SSID
}

void connectWifi() {
  Serial.println("Connecting as wifi client...");
  WiFi.disconnect();
  WiFi.begin(ssid, password);
  int connRes = WiFi.waitForConnectResult();
  Serial.print("connRes: ");
  Serial.println(connRes);
}

void loop() {
  if (connect) {
    Serial.println("Connect requested");
    connect = false;
    connectWifi();
    lastConnectTry = millis();
  }
  {
    unsigned int s = WiFi.status();
    if (s == 0 && millis() > (lastConnectTry + 60000)) {
      /* If WLAN disconnected and idle try to connect */
      /* Don't set retry time too low as retry interfere the softAP operation */
      connect = true;
    }
    if (status != s) { // WLAN status change
      Serial.print("Status: ");
      Serial.println(s);
      status = s;
      if (s == WL_CONNECTED) {
        /* Just connected to WLAN */
        Serial.println("");
        Serial.print("Connected to ");
        Serial.println(ssid);
        Serial.print("IP address: ");
        Serial.println(WiFi.localIP());

        // Setup MDNS responder
        if (!MDNS.begin(myHostname)) {
          Serial.println("Error setting up MDNS responder!");
        } else {
          Serial.println("mDNS responder started");
          // Add service to MDNS-SD
          MDNS.addService("http", "tcp", 80);
        }
      } else if (s == WL_NO_SSID_AVAIL) {
        WiFi.disconnect();
      }
    }
    if (s == WL_CONNECTED) {
      MDNS.update();
    }
  }
  // Do work:
  //DNS
  dnsServer.processNextRequest();
  //HTTP
  server.handleClient();
}
c++ arduino-esp8266 wificonfiguration access-point
1个回答
2
投票

发现这一点：https://www.esp8266.com/viewtopic.php?f=6&t=15993

这篇文章eduperez的：

“Android设备有谷歌DNSS硬编码，他们将始终使用8.8.8.8 8.8.4.4和，尽管什么DHPC服务器可能会告诉他们使用，你需要配置网关，所有传出流量重定向到端口53到您的DNS“。

这给了这个想法，使用8.8.8.8作为IP地址和DNS作为服务器地址。田田！奇迹般有效！

所以这个草图将工作：

#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <DNSServer.h>
#include <ESP8266mDNS.h>
#include <EEPROM.h>

/*
   This example serves a "hello world" on a WLAN and a SoftAP at the same time.
   The SoftAP allow you to configure WLAN parameters at run time. They are not setup in the sketch but saved on EEPROM.
   Connect your computer or cell phone to wifi network ESP_ap with password 12345678. A popup may appear and it allow you to go to WLAN config. If it does not then navigate to http://192.168.4.1/wifi and config it there.
   Then wait for the module to connect to your wifi and take note of the WLAN IP it got. Then you can disconnect from ESP_ap and return to your regular WLAN.
   Now the ESP8266 is in your network. You can reach it through http://192.168.x.x/ (the IP you took note of) or maybe at http://esp8266.local too.
   This is a captive portal because through the softAP it will redirect any http request to http://192.168.4.1/
*/

/* Set these to your desired softAP credentials. They are not configurable at runtime */
#ifndef APSSID
#define APSSID "TheGeekMan"
#define APPSK  "12345678"
#endif

const char *softAP_ssid = APSSID;
const char *softAP_password = APPSK;

/* hostname for mDNS. Should work at least on windows. Try http://esp8266.local */
const char *myHostname = "thegeekman";

/* Don't set this wifi credentials. They are configurated at runtime and stored on EEPROM */
char ssid[32] = "";
char password[32] = "";

// DNS server
const byte DNS_PORT = 53;
DNSServer dnsServer;

// Web server
ESP8266WebServer server(80);

/* Soft AP network parameters */
//IPAddress apIP(192, 168, 4, 1);
IPAddress apIP(8, 8, 8, 8);
IPAddress netMsk(255, 255, 255, 0);


/** Should I connect to WLAN asap? */
boolean connect;

/** Last time I tried to connect to WLAN */
unsigned long lastConnectTry = 0;

/** Current WLAN status */
unsigned int status = WL_IDLE_STATUS;

/** Is this an IP? */
boolean isIp(String str) {
  for (size_t i = 0; i < str.length(); i++) {
    int c = str.charAt(i);
    if (c != '.' && (c < '0' || c > '9')) {
      return false;
    }
  }
  return true;
}

/** IP to String? */
String toStringIp(IPAddress ip) {
  String res = "";
  for (int i = 0; i < 3; i++) {
    res += String((ip >> (8 * i)) & 0xFF) + ".";
  }
  res += String(((ip >> 8 * 3)) & 0xFF);
  return res;
}

/** Load WLAN credentials from EEPROM */
void loadCredentials() {
  EEPROM.begin(512);
  EEPROM.get(0, ssid);
  EEPROM.get(0 + sizeof(ssid), password);
  char ok[2 + 1];
  EEPROM.get(0 + sizeof(ssid) + sizeof(password), ok);
  EEPROM.end();
  if (String(ok) != String("OK")) {
    ssid[0] = 0;
    password[0] = 0;
  }
  Serial.println("Recovered credentials:");
  Serial.println(ssid);
  Serial.println(strlen(password) > 0 ? "********" : "<no password>");
}

/** Store WLAN credentials to EEPROM */
void saveCredentials() {
  EEPROM.begin(512);
  EEPROM.put(0, ssid);
  EEPROM.put(0 + sizeof(ssid), password);
  char ok[2 + 1] = "OK";
  EEPROM.put(0 + sizeof(ssid) + sizeof(password), ok);
  EEPROM.commit();
  EEPROM.end();
}

/** Handle root or redirect to captive portal */
void handleRoot() {
  if (captivePortal()) { // If caprive portal redirect instead of displaying the page.
    return;
  }
  server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
  server.sendHeader("Pragma", "no-cache");
  server.sendHeader("Expires", "-1");

  String Page;
  Page += F(
            "<html><head></head><body>"
            "<h1>HELLO WORLD!!</h1>");
  if (server.client().localIP() == apIP) {
    Page += String(F("<p>You are connected through the soft AP: ")) + softAP_ssid + F("</p>");
  } else {
    Page += String(F("<p>You are connected through the wifi network: ")) + ssid + F("</p>");
  }
  Page += F(
            "<p>You may want to <a href='/wifi'>config the wifi connection</a>.</p>"
            "</body></html>");

  server.send(200, "text/html", Page);
}

/** Redirect to captive portal if we got a request for another domain. Return true in that case so the page handler do not try to handle the request again. */
boolean captivePortal() {
  if (!isIp(server.hostHeader()) && server.hostHeader() != (String(myHostname) + ".local")) {
    Serial.println("Request redirected to captive portal");
    server.sendHeader("Location", String("http://") + toStringIp(server.client().localIP()), true);
    server.send(302, "text/plain", "");   // Empty content inhibits Content-length header so we have to close the socket ourselves.
    server.client().stop(); // Stop is needed because we sent no content length
    return true;
  }
  return false;
}

/** Wifi config page handler */
void handleWifi() {
  server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
  server.sendHeader("Pragma", "no-cache");
  server.sendHeader("Expires", "-1");

  String Page;
  Page += F(
            "<html><head></head><body>"
            "<h1>Wifi config</h1>");
  if (server.client().localIP() == apIP) {
    Page += String(F("<p>You are connected through the soft AP: ")) + softAP_ssid + F("</p>");
  } else {
    Page += String(F("<p>You are connected through the wifi network: ")) + ssid + F("</p>");
  }
  Page +=
    String(F(
             "\r\n<br />"
             "<table><tr><th align='left'>SoftAP config</th></tr>"
             "<tr><td>SSID ")) +
    String(softAP_ssid) +
    F("</td></tr>"
      "<tr><td>IP ") +
    toStringIp(WiFi.softAPIP()) +
    F("</td></tr>"
      "</table>"
      "\r\n<br />"
      "<table><tr><th align='left'>WLAN config</th></tr>"
      "<tr><td>SSID ") +
    String(ssid) +
    F("</td></tr>"
      "<tr><td>IP ") +
    toStringIp(WiFi.localIP()) +
    F("</td></tr>"
      "</table>"
      "\r\n<br />"
      "<table><tr><th align='left'>WLAN list (refresh if any missing)</th></tr>");
  Serial.println("scan start");
  int n = WiFi.scanNetworks();
  Serial.println("scan done");
  if (n > 0) {
    for (int i = 0; i < n; i++) {
      Page += String(F("\r\n<tr><td>SSID ")) + WiFi.SSID(i) + ((WiFi.encryptionType(i) == ENC_TYPE_NONE) ? F(" ") : F(" *")) + F(" (") + WiFi.RSSI(i) + F(")</td></tr>");
    }
  } else {
    Page += F("<tr><td>No WLAN found</td></tr>");
  }
  Page += F(
            "</table>"
            "\r\n<br /><form method='POST' action='wifisave'><h4>Connect to network:</h4>"
            "<input type='text' placeholder='network' name='n'/>"
            "<br /><input type='password' placeholder='password' name='p'/>"
            "<br /><input type='submit' value='Connect/Disconnect'/></form>"
            "<p>You may want to <a href='/'>return to the home page</a>.</p>"
            "</body></html>");
  server.send(200, "text/html", Page);
  server.client().stop(); // Stop is needed because we sent no content length
}

/** Handle the WLAN save form and redirect to WLAN config page again */
void handleWifiSave() {
  Serial.println("wifi save");
  server.arg("n").toCharArray(ssid, sizeof(ssid) - 1);
  server.arg("p").toCharArray(password, sizeof(password) - 1);
  server.sendHeader("Location", "wifi", true);
  server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
  server.sendHeader("Pragma", "no-cache");
  server.sendHeader("Expires", "-1");
  server.send(302, "text/plain", "");    // Empty content inhibits Content-length header so we have to close the socket ourselves.
  server.client().stop(); // Stop is needed because we sent no content length
  saveCredentials();
  connect = strlen(ssid) > 0; // Request WLAN connect with new credentials if there is a SSID
}

void handleNotFound() {
  if (captivePortal()) { // If caprive portal redirect instead of displaying the error page.
    return;
  }
  String message = F("File Not Found\n\n");
  message += F("URI: ");
  message += server.uri();
  message += F("\nMethod: ");
  message += (server.method() == HTTP_GET) ? "GET" : "POST";
  message += F("\nArguments: ");
  message += server.args();
  message += F("\n");

  for (uint8_t i = 0; i < server.args(); i++) {
    message += String(F(" ")) + server.argName(i) + F(": ") + server.arg(i) + F("\n");
  }
  server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
  server.sendHeader("Pragma", "no-cache");
  server.sendHeader("Expires", "-1");
  server.send(404, "text/plain", message);
}

void setup() {
  delay(1000);
  Serial.begin(9600);
  Serial.println();
  Serial.println("Configuring access point...");
  /* You can remove the password parameter if you want the AP to be open. */
  WiFi.softAPConfig(apIP, apIP, netMsk);
  WiFi.softAP(softAP_ssid, softAP_password);
  delay(500); // Without delay I've seen the IP address blank
  Serial.print("AP IP address: ");
  Serial.println(WiFi.softAPIP());

  /* Setup the DNS server redirecting all the domains to the apIP */
  dnsServer.setErrorReplyCode(DNSReplyCode::NoError);
  dnsServer.start(DNS_PORT, "*", apIP);

  /* Setup web pages: root, wifi config pages, SO captive portal detectors and not found. */
  server.on("/", handleRoot);
  server.on("/wifi", handleWifi);
  server.on("/wifisave", handleWifiSave);
  server.on("/generate_204", handleRoot);  //Android captive portal. Maybe not needed. Might be handled by notFound handler.
  server.on("/fwlink", handleRoot);  //Microsoft captive portal. Maybe not needed. Might be handled by notFound handler.
  server.onNotFound(handleNotFound);
  server.begin(); // Web server start
  Serial.println("HTTP server started");
  loadCredentials(); // Load WLAN credentials from network
  connect = strlen(ssid) > 0; // Request WLAN connect if there is a SSID
}

void connectWifi() {
  Serial.println("Connecting as wifi client...");
  WiFi.disconnect();
  WiFi.begin(ssid, password);
  int connRes = WiFi.waitForConnectResult();
  Serial.print("connRes: ");
  Serial.println(connRes);
}

void loop() {
  if (connect) {
    Serial.println("Connect requested");
    connect = false;
    connectWifi();
    lastConnectTry = millis();
  }
  {
    unsigned int s = WiFi.status();
    if (s == 0 && millis() > (lastConnectTry + 60000)) {
      /* If WLAN disconnected and idle try to connect */
      /* Don't set retry time too low as retry interfere the softAP operation */
      connect = true;
    }
    if (status != s) { // WLAN status change
      Serial.print("Status: ");
      Serial.println(s);
      status = s;
      if (s == WL_CONNECTED) {
        /* Just connected to WLAN */
        Serial.println("");
        Serial.print("Connected to ");
        Serial.println(ssid);
        Serial.print("IP address: ");
        Serial.println(WiFi.localIP());

        // Setup MDNS responder
        if (!MDNS.begin(myHostname)) {
          Serial.println("Error setting up MDNS responder!");
        } else {
          Serial.println("mDNS responder started");
          // Add service to MDNS-SD
          MDNS.addService("http", "tcp", 80);
        }
      } else if (s == WL_NO_SSID_AVAIL) {
        WiFi.disconnect();
      }
    }
    if (s == WL_CONNECTED) {
      MDNS.update();
    }
  }
  // Do work:
  //DNS
  dnsServer.processNextRequest();
  //HTTP
  server.handleClient();
}

Example

最新问题
© www.soinside.com 2019 - 2024. All rights reserved.