误差为编译板NodeMCU 1.0（ESP-12模块）

Question

我有我的连接V3 NodeMCU到Arduino IDE的问题。我已经做了与Arduino的UNO（不火力的部分）连接到超声波传感器相同的代码，也没有问题，但试图将NodeMCU V3连接到超声波传感器，当我得到这个错误。

我正在试图做的是从传感器收集数据，并同时使用NodeMCU V3 ......我跟上有问题将其存储到火力点。

这是Arduino的IDE我NodeMCU设置：

板：NodeMCU 1.0（ESP-12E模块）上传速度：115200 CPU频率：80 MHz的闪存大小为4m（无spiffs）调试端口：禁用调试级：无IWLP变体：V2低存储器的VTable：闪光例外：启用擦除闪存：只有素描端口：COM6

#include <FirebaseArduino.h>
#include <ESP8266WiFi.h>     //wifi library
#define WIFI_SSID "wifi001"  //replace SSID with your wifi username
#define WIFI_PASSWORD "1234" //replace PWD with your wifi password
#define WIFI_LED D5          //connect a led to any of the gpio pins of the board and replace pin_number with it eg. D4
#define FIREBASE_HOST "some_firebase_host" //link of api
#define FIREBASE_AUTH "secret"             //database secret

int trig = 8;
int echo = 7;

long microsecondsToInches(float microseconds)
{
    return microseconds / 74 / 2;
}

long microsecondsToCentimeters(float microseconds)
{
    return microseconds / 29 / 2;
}


void setup()
{
    Serial.begin(9600);

    pinMode(WIFI_LED, OUTPUT); //define pinmodes
    WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
    //connect to wifi
    while (WiFi.status() != WL_CONNECTED)
    { //wait till connected to WiFi
        delay(100);
        digitalWrite(WIFI_LED, LOW); //Blink the light till connected to WiFi
        delay(100);
        digitalWrite(WIFI_LED, HIGH);
        Serial.print(".");
    }

    Serial.println("");
    Serial.println("WiFi connected");
    digitalWrite(WIFI_LED, HIGH);
    Serial.println("IP address: ");
    Serial.println(WiFi.localIP());

    Firebase.begin(FIREBASE_HOST, FIREBASE_AUTH); //connect to Database
    pinMode(trig, OUTPUT);
    pinMode(echo, INPUT);

    delay(1000);
}

void loop()
{
    String firebaseResult = firebaseGet();
    delay(100);

    // Transmitting pulse
    digitalWrite(trig, LOW);
    delayMicroseconds(2);
    digitalWrite(trig, HIGH);
    delayMicroseconds(10);
    digitalWrite(trig, LOW);

    float t = 0, h = 0, hp = 0, inches = 0, cm = 0, offset = 1.8;

    if (firebaseResult == "ON")
    {
        //code to happen if the status is ON

        // Waiting for pulse
        t = pulseIn(echo, HIGH);

        // Calculating distance

        h = t;
        hp = h;
        h = t / offset; //half the bottle (16)
        h = h - 7;      // water height, 0 - 50 cm   - 0-16cm
                        //
        hp = (2 * h);   // distance in %, 0-100 %

        cm = microsecondsToCentimeters(hp);
        Serial.print(cm);
        Serial.print("\n");

        delay(1000);
    }
    else
    {
        //code to happen if the status is OFF
    }
}

该错误显示为：

Arduino: 1.8.8 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Enabled, 4M (no SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\Elias\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\Elias\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Elias\Documents\Arduino\libraries -fqbn=esp8266:esp8266:nodemcuv2:xtal=80,vt=flash,exception=enabled,eesz=4M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=115200 -ide-version=10808 -build-path C:\Users\Elias\AppData\Local\Temp\arduino_build_989711 -warnings=none -build-cache C:\Users\Elias\AppData\Local\Temp\arduino_cache_309203 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.esptool.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\esptool\2.5.0-3-20ed2b9 -prefs=runtime.tools.esptool-2.5.0-3-20ed2b9.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\esptool\2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc-2.5.0-3-20ed2b9.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs-2.5.0-3-20ed2b9.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\2.5.0-3-20ed2b9 -verbose C:\Users\Elias\Desktop\level_meter\mustwork\now\now.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\Elias\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\Elias\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Elias\Documents\Arduino\libraries -fqbn=esp8266:esp8266:nodemcuv2:xtal=80,vt=flash,exception=enabled,eesz=4M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=115200 -ide-version=10808 -build-path C:\Users\Elias\AppData\Local\Temp\arduino_build_989711 -warnings=none -build-cache C:\Users\Elias\AppData\Local\Temp\arduino_cache_309203 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.esptool.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\esptool\2.5.0-3-20ed2b9 -prefs=runtime.tools.esptool-2.5.0-3-20ed2b9.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\esptool\2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc-2.5.0-3-20ed2b9.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs-2.5.0-3-20ed2b9.path=C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\2.5.0-3-20ed2b9 -verbose C:\Users\Elias\Desktop\level_meter\mustwork\now\now.ino
Using board 'nodemcuv2' from platform in folder: C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0-beta2
Using core 'esp8266' from platform in folder: C:\Users\Elias\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0-beta2
Detecting libraries used...
"C:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2/tools/sdk/include" "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2/tools/sdk/lwip2/include" "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\Elias\\AppData\\Local\\Temp\\arduino_build_989711/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fexceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10808 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_NODEMCU\"" -DESP8266 "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2\\cores\\esp8266" "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2\\variants\\nodemcu" "C:\\Users\\Elias\\AppData\\Local\\Temp\\arduino_build_989711\\sketch\\now.ino.cpp" -o nul
"C:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2/tools/sdk/include" "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2/tools/sdk/lwip2/include" "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\Elias\\AppData\\Local\\Temp\\arduino_build_989711/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fexceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10808 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_NODEMCU\"" -DESP8266 "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2\\cores\\esp8266" "-IC:\\Users\\Elias\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.5.0-beta2\\variants\\nodemcu" "-IC:\\Users\\Elias\\Documents\\Arduino\\libraries\\firebase-arduino-master\\src" "C:\\Users\\Elias\\AppData\\Local\\Temp\\arduino_build_989711\\sketch\\now.ino.cpp" -o nul
In file included from C:\Users\Elias\Documents\Arduino\libraries\firebase-arduino-master\src/FirebaseArduino.h:22:0,

                 from C:\Users\Elias\Desktop\level_meter\mustwork\now\now.ino:1:

C:\Users\Elias\Documents\Arduino\libraries\firebase-arduino-master\src/Firebase.h:26:25: fatal error: ArduinoJson.h: No such file or directory

 #include <ArduinoJson.h>

                         ^

compilation terminated.

Using library firebase-arduino-master at version 0.1 in folder: C:\Users\Elias\Documents\Arduino\libraries\firebase-arduino-master 
exit status 1
Error compiling for board NodeMCU 1.0 (ESP-12E Module).
Invalid library found in C:\Users\Elias\Documents\Arduino\libraries\teckel12-arduino-new-ping-2ebf391d9be2: no headers files (.h) found in C:\Users\Elias\Documents\Arduino\libraries\teckel12-arduino-new-ping-2ebf391d9be2
Invalid library found in C:\Users\Elias\Documents\Arduino\libraries\teckel12-arduino-new-ping-2ebf391d9be2: no headers files (.h) found in C:\Users\Elias\Documents\Arduino\libraries\teckel12-arduino-new-ping-2ebf391d9be2

Answer 1

在火力地堡的Arduino库需要安装ArduinoJson库。这可以通过使用库管理器进行安装（找到在Tools菜单）来完成。

火力地堡的Arduino也需要的Arduino的Json的旧版本如5.13.1并且不与新版本兼容。