我使用3个定时器（TIM4_CH1，TIM3_CH1，TIM2_CH1）从AURORA9x捕获输入PWM信号。一切都很好，除了TIM2_CH1。我无法解决这个问题3天。也许你有些人遇到过这个问题。这里代码为三个计时器。所有计时器的配置都相同，但TIM2不起作用
#include "stm32f10x.h"
#include "stm32f10x_rcc.h"
#include "can.h"
#include "main.h"
void TIM4_Config(void);
void TIM3_Config(void);
void TIM2_Config(void);
uint32_t DataCapture_TIM4=0,
DataCapture_TIM3=0,
DataCapture_TIM2=0;
用于TIM4_CH1捕获模式的定时器配置
void TIM4_Config(void)
{
TIM_TimeBaseInitTypeDef TIM_Time_user;
GPIO_InitTypeDef port;
TIM_ICInitTypeDef TIM_ICInit_user;
NVIC_InitTypeDef NVIC_InitStructure2;
// TIM4 clock enable
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE);
// GPIOB clock enable
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
// TIM4 channel_1 configuration : PB6
port.GPIO_Pin = GPIO_Pin_6;
port.GPIO_Mode = GPIO_Mode_IN_FLOATING;
port.GPIO_Speed = GPIO_Speed_2MHz;
GPIO_Init(GPIOB, &port);
// Connect TIM pin to AF2
// Enable the TIM4 global Ymtirrupt
NVIC_InitStructure2.NVIC_IRQChannel = TIM4_IRQn;
NVIC_InitStructure2.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure2.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure2.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure2);
// Time base configuration
TIM_Time_user.TIM_Period = PERIOD;
TIM_Time_user.TIM_Prescaler = PRESCALER;
TIM_Time_user.TIM_ClockDivision = TIM_CKD_DIV1;
TIM_Time_user.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM4, &TIM_Time_user);
//Capture configuration
TIM_ICInit_user.TIM_Channel = TIM_Channel_1;
TIM_ICInit_user.TIM_ICPolarity = TIM_ICPolarity_Rising;
TIM_ICInit_user.TIM_ICSelection = TIM_ICSelection_DirectTI;
TIM_ICInit_user.TIM_ICPrescaler = TIM_ICPSC_DIV1;
TIM_ICInit_user.TIM_ICFilter = 0x0;
//Inicialize our structure for capture signal
TIM_PWMIConfig(TIM4, &TIM_ICInit_user);
//input trigger
TIM_SelectInputTrigger(TIM4, TIM_TS_TI1FP1);
TIM_SelectSlaveMode(TIM4, TIM_SlaveMode_Reset);
// Select the slave Mode: Reset Mode
TIM_SelectMasterSlaveMode(TIM4,TIM_MasterSlaveMode_Enable);
// Enable the TIM4 Counter
TIM4->CR1 |= TIM_CR1_CEN;
// Enable the CC1 Interrupt request
TIM4->DIER |= TIM_IT_CC1;
}
TIM4_CH1的中断处理程序
void TIM4_IRQHandler(void)
{
if (TIM4->SR & TIM_SR_CC1IF )
{
DataCapture_TIM4 = TIM4->CCR2;
}
}
TIM3_Ch1的捕获模式
void TIM3_Config(void)
{
TIM_TimeBaseInitTypeDef TIM_Time_user;
GPIO_InitTypeDef port;
TIM_ICInitTypeDef TIM_ICInit_user1;
NVIC_InitTypeDef NVIC_InitStructure1;
// TIM4 clock enable
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
// GPIOB clock enable
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
// TIM channel1 confikurotion : PA6
port.GPIO_Pin = GPIO_Pin_6;
port.GPIO_Mode = GPIO_Mode_IN_FLOATING;///////////////////////////////
port.GPIO_Speed = GPIO_Speed_2MHz;
GPIO_Init(GPIOA, &port);
// Enable the TIM3 global interrupt
NVIC_InitStructure1.NVIC_IRQChannel = TIM3_IRQn;
NVIC_InitStructure1.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure1.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure1.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure1);
// Time base configuration
TIM_Time_user.TIM_Period = PERIOD;
TIM_Time_user.TIM_Prescaler = PRESCALER;
TIM_Time_user.TIM_ClockDivision = TIM_CKD_DIV1;
TIM_Time_user.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM3, &TIM_Time_user);
//
TIM_ICInit_user1.TIM_Channel = TIM_Channel_1;
TIM_ICInit_user1.TIM_ICPolarity = TIM_ICPolarity_Rising;
TIM_ICInit_user1.TIM_ICSelection = TIM_ICSelection_DirectTI;
TIM_ICInit_user1.TIM_ICPrescaler = TIM_ICPSC_DIV1;
TIM_ICInit_user1.TIM_ICFilter = 0x0;
//
TIM_PWMIConfig(TIM3, &TIM_ICInit_user1);
//input trigger
TIM_SelectInputTrigger(TIM3, TIM_TS_TI1FP1);
TIM_SelectSlaveMode(TIM3, TIM_SlaveMode_Reset);
// Select the slave Mode: Reset Mode
TIM_SelectMasterSlaveMode(TIM3,TIM_MasterSlaveMode_Enable);
// Enable the TIM3 Counter
TIM3->CR1 |= TIM_CR1_CEN;
// Enable the CC1 Intirrupt Request
TIM3->DIER |= TIM_IT_CC1;
}
Interrupt handler for TIM3_CH1
void TIM3_IRQHandler(void)
{
if (TIM3->SR & TIM_SR_CC1IF )
{
DataCapture_TIM3 = TIM3->CCR2;
}
}
这里的问题是TIM2_Ch1的捕获模式
void TIM2_Config(void)
{
TIM_TimeBaseInitTypeDef TIM_Time_user;
GPIO_InitTypeDef port;
TIM_ICInitTypeDef TIM_ICInit_user;
NVIC_InitTypeDef NVIC_InitStructure2;
// TIM4 clock enable
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
// GPIOB clock enable
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
// TIM2 channel_1 configuration : PA0
port.GPIO_Pin = GPIO_Pin_0;
port.GPIO_Mode = GPIO_Mode_IN_FLOATING;
port.GPIO_Speed = GPIO_Speed_2MHz;
GPIO_Init(GPIOA, &port);
// Enable the TIM2 global Interrupt
NVIC_InitStructure2.NVIC_IRQChannel = TIM2_IRQn;
NVIC_InitStructure2.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure2.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure2.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure2);
// Time base configuration
TIM_Time_user.TIM_Period = PERIOD;
TIM_Time_user.TIM_Prescaler = PRESCALER;
TIM_Time_user.TIM_ClockDivision = TIM_CKD_DIV1;
TIM_Time_user.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM2, &TIM_Time_user);
//
TIM_ICInit_user.TIM_Channel = TIM_Channel_1;
TIM_ICInit_user.TIM_ICPolarity = TIM_ICPolarity_Rising;
TIM_ICInit_user.TIM_ICSelection = TIM_ICSelection_DirectTI;
TIM_ICInit_user.TIM_ICPrescaler = TIM_ICPSC_DIV1;
TIM_ICInit_user.TIM_ICFilter = 0x0;
//
TIM_PWMIConfig(TIM2, &TIM_ICInit_user);
//input trigger
TIM_SelectInputTrigger(TIM2, TIM_TS_TI1FP1);
TIM_SelectSlaveMode(TIM2, TIM_SlaveMode_Reset);
// Select the slave Mode: Reset Mode
TIM_SelectMasterSlaveMode(TIM2,TIM_MasterSlaveMode_Enable);
// Enable the TIM2 Counter
TIM2->CR1 |= TIM_CR1_CEN;
// Enable the CC1 Interrupt Request
TIM2->DIER |= TIM_IT_CC1;
}
TIM2_CH1的中断处理程序
void TIM2_IRQHandler(void)
{
if (TIM2->SR & TIM_SR_CC1IF )
{
DataCapture_TIM2 = TIM2->CCR2;
}
}
抱歉，我无法添加评论。您可以在调试模式下检查您的设置寄存器值，并检查您的工作和CubeMx设置之间的不同以查找问题
作为替代答案，我建议你尝试CubeMX。它是STM32的代码生成器，可以帮助您快速编写STM32低级驱动程序。