有时，当我们执行错误记录时，我们会得到错误的数据，并且以下存储过程会出现错误，错误代码为
“sql> 调用 REFLOADER.SP_ALL_ES_CODE() [2018-11-20 10:14:01] [22004][-87] 在不允许空值的上下文中指定了空值。 SQLCODE=-87，SQLSTATE=22004，DRIVER=4.23.42 ”.
因此，我想将错误代码与下面脚本中失败的错误值/记录集分开。您能帮忙提供一下代码吗？在哪里以及如何获得错误记录输出。
创建或替换过程SCHEMA1.SP_ALL_CODE () 动态结果集 1 P1：开始
DECLARE SQLSTATE CHAR(5) DEFAULT '00000';
DECLARE l_stmt VARCHAR(5000);
DECLARE l_dynamic_sql VARCHAR(5000);
DECLARE l_uuid CHAR(36);
DECLARE l_ID VARCHAR(255);
DECLARE l_table VARCHAR(100);
DECLARE l_exists integer;
DECLARE l_changed integer;
DECLARE l_CID VARCHAR(255);
DECLARE l_Tt VARCHAR(255);
DECLARE l_TL VARCHAR(255);
DECLARE l_DateStart DATE;
DECLARE l_DateEnd DATE;
DECLARE l_DateEnd_Format DATE;
P2: BEGIN
-- Declare cursor
DECLARE cursor1 CURSOR WITH RETURN TO CLIENT FOR
SELECT c.ID , REPLACE(CID,'''',''''''), REPLACE(tt,'''',''''''), TL ,DateStart ,DateEnd , tablename
FROM SCHEMA1.ALL_CODE c, SCHEMA1.ID_TABLENAME t
WHERE c.id = t.id
and t.tabletype = 1
-- Access Location/Site (ignore end dated)
--and (c.oid != '2.16.840.1.113883.3.2390.2.2.26' OR DateEnd is null)
and (t.tablename != 'FREQUENCY' OR DateEnd is null)
and (t.tablename != 'ORDER_FREQUENCY' OR DateEnd is null)
Order By c.ID , CID;
-- Cursor left open for client application
OPEN cursor1;
FETCH FROM cursor1 INTO
l_ID , l_CID , l_Tt , l_TL , l_DateStart , l_DateEnd, l_table ;
WHILE(SQLSTATE = '00000')
DO
--Insert or Update
IF (l_DateStart IS NULL) THEN
SET l_DateStart = '1900-01-01';
END IF;
--exception
-- L_TEST (smart) 216840
If l_id = '216840' Then
SET l_CID = LPAD(l_CID,4,'0' );
End if;
SET l_exists = 0;
SET l_dynamic_sql = 'select count(*) from m_ref.' || l_table || ' where c_id =' || '''' || l_id || ':' || l_cId || '''' ;
--INSERT INTO SCHEMA1.dml_ins_upd VALUES (l_dynamic_sql);
PREPARE p_exist_cursor from l_dynamic_sql;
P3: BEGIN
DECLARE exist_cursor CURSOR FOR p_exist_cursor;
OPEN exist_cursor;
FETCH exist_cursor INTO l_exists;
CLOSE exist_cursor;
END P3;
IF (l_exists = 0)
THEN
SET l_uuid = RANDOMUUID();
SET l_stmt = 'Insert into SCHEMA1.' || l_table ||
' (ID, CID, DISPLAY_NAME, END_DATE, START_DATE) values (' ||
'''' || l_uuid || '''' || ',' ||
'''' || l_oid || ':' || l_cId || '''' || ',' ||
'''' || l_Tt || '''' || ',';
IF (l_DateEnd IS NULL) THEN
SET l_stmt = l_stmt || 'NULL' || ',' ;
ELSE
SET l_stmt = l_stmt || '''' || VARCHAR_FORMAT(l_DateEnd, 'YYYY-MM-DD') || '''' || ',' ;
END IF;
SET l_stmt = l_stmt || '''' || VARCHAR_FORMAT(l_DateStart, 'YYYY-MM-DD') || '''' || ');' ;
if (l_stmt is null) then
set l_stmt = 'YYY';
end if;
INSERT INTO SCHEMA1.dml_ins_upd VALUES (l_stmt);
-- Exceptions
-- CC
If l_table = 'CARECAT' Then
SET l_stmt = 'Update SCHEMA1.CARE_CATEGORY SET CONTEXT_NAME = ' || '''' || 'NOTE' || '''';
SET l_stmt = l_stmt || ' WHERE cid = ' || '''' || (l_id || ':' || l_cId) || '''' || ';' ;
if (l_stmt is null) then
set l_stmt = 'BBB';
end if;
INSERT INTO REFLOADER.dml_ins_upd VALUES (l_stmt);
End if;
-- LTEST (Test) 2168401
If l_id = '2168401' Then
SET l_stmt = 'Update SCHEMA1.LTEST SET IS_FLAG = 0';
SET l_stmt = l_stmt || ' WHERE code_id = ' || '''' || (l_id || ':' || l_cId) || '''' || ';' ;
if (l_stmt is null) then
set l_stmt = 'XXX';
end if;
INSERT INTO REFLOADER.dml_ins_upd VALUES (l_stmt);
End if;
-- LAB_TEST (Panel) 2168401
If l_id = '2168401' Then
SET l_stmt = 'Update SCHEMA1.LTEST SET IS_FLAG = 1';
SET l_stmt = l_stmt || ' WHERE code_id = ' || '''' || (l_id || ':' || l_cId) || '''' || ';' ;
if (l_stmt is null) then
set l_stmt = 'TTT';
end if;
INSERT INTO SCHEMA1.dml_ins_upd VALUES (l_stmt);
End if;
------------------------------
END IF;
IF (l_exists != 0)
THEN
SET l_changed = 0;
SET l_dynamic_sql = 'select count(*) ' ||
' from SCHEMA1.' || l_table ||
' where cid = ' || '''' || l_id || ':' || l_cId || '''' ;
if (l_termshort is null) then
SET l_dynamic_sql = l_dynamic_sql ||
' and (display_name != null ';
else
SET l_dynamic_sql = l_dynamic_sql ||
' and (display_name != ' || '''' || l_tt || '''' ;
end if;
--Exception FREQUENCY
If (l_table = 'FREQUENCY') Then
if (l_tl is null) then
SET l_dynamic_sql = l_dynamic_sql ||
' OR numeric_value is not null ';
else
SET l_dynamic_sql = l_dynamic_sql ||
' OR numeric_value is null ' ||
' OR numeric_value != ' || l_tl ;
end if;
End IF;
---
SET l_dynamic_sql = l_dynamic_sql ||
' OR date(start_date) != ' || '''' || VARCHAR_FORMAT(l_DateStart, 'YYYY-MM-DD') || '''' ;
if (l_DateEnd is null) then
SET l_dynamic_sql = l_dynamic_sql || ' OR end_date is not null';
else
SET l_dynamic_sql = l_dynamic_sql || ' OR end_date is null OR date(end_date) != ' || '''' || VARCHAR_FORMAT(l_DateEnd, 'YYYY-MM-DD') || '''' ;
end if;
SET l_dynamic_sql = l_dynamic_sql || ')';
--INSERT INTO REFLOADER.dml_ins_upd VALUES (l_dynamic_sql);
PREPARE p_changed_cursor from l_dynamic_sql;
P4: BEGIN
DECLARE change_cursor CURSOR FOR p_changed_cursor;
OPEN change_cursor;
FETCH change_cursor INTO l_changed;
CLOSE change_cursor;
END P4;
IF (l_changed = 1)
THEN
SET l_stmt = 'Update SCHEMA1.' || l_table || ' SET display_name = ' || '''' || l_TS || '''' || ',';
--Exception FREQUENCY
If (l_table = 'FREQUENCY') Then
IF (l_TL IS NULL) THEN
SET l_stmt = l_stmt || ' numeric_value = ' || 'NULL' || ',' ;
ELSE
SET l_stmt = l_stmt || ' numeric_value = ' || l_tl || ',' ;
END IF;
End IF;
---
IF (l_DateEnd IS NULL) THEN
SET l_stmt = l_stmt || ' end_date = ' || 'NULL' || ',' ;
ELSE
SET l_stmt = l_stmt || ' end_date = ' || '''' || VARCHAR_FORMAT(l_DateEnd, 'YYYY-MM-DD') || '''' || ',' ;
END IF;
SET l_stmt = l_stmt || ' start_date = ' || '''' || VARCHAR_FORMAT(l_DateStart, 'YYYY-MM-DD') || '''' ;
SET l_stmt = l_stmt || ' WHERE cid = ' || '''' || (l_id || ':' || l_cId) || '''' || ';' ;
if (l_stmt is null) then
set l_stmt = 'XXX';
end if;
INSERT INTO SCHEMA1.dml_ins_upd VALUES (l_stmt);
END IF;
END IF;
-- Fetch Next
FETCH FROM cursor1 INTO
l_ID , l_CID , l_Tt , l_TL , l_DateStart , l_DateEnd, l_table;
END WHILE;
CLOSE cursor1;
END P2;
commit work;
END P1;
您的工具必须能够显示数据库管理器在您的语句上返回的所谓的 SQLCA 结构。 DB2 命令行处理器使用“-a”参数显示此结构。有错误的代码行位于 sqlerrd(3) 字段中（请参阅链接中的示例）。